12
Adjusting the Clamp Pressure
The clamps provided with your stringing ma-
chine will need minor adjustments according
to what string type, construction, and gauge
you are using.
To adjust the gap (clamping pressure)
between the clamp jaws, insert the string
through the racquet as if you were beginning
the main strings. Clamp the strings and pull
tension. If the string slips through the jaws of
the clamp, tighten the clamp by compress-
ing the clamp jaws together by hand while
turning the Adjustment Knob, in the clockwise
direction. If the clamp leaves impressions
or damages the string, it may be excessively tight and should be adjusted by turning the
hex screw counter clockwise to open the gap between the jaws. The clamp jaws should be
cleaned periodically to be free from dirt, oil, and any string coating for them to grip properly.
Note:
The string clamps supplied with your stringing machine can accommodate tight string
patterns such as badminton. Depending on the string pattern, the clamp may spread the
strings slightly which will not compromise the quality of the string job.
Adjusting the Turntable Bushings
The turntable bushing is adjusted at the fac-
tory for optimum performance. After time and
use, the turntable bushings may need minor
adjustment. An adjustment is indicated when
noticeable turntable looseness or wobble
occurs while stringing.
To adjust the fi t between the turntable pin
and the bushings, tighten the set screw at the
top of the bushing using a 3mm hex wrench.
MAINTENANCE & ADJUSTMENTS
Adjustment
Knob
