0
5. error Messages/Troubleshooting
If an error occurs during a measurement,
the measurement is discontinued and a cor-
responding error code is displayed (picture:
error no. )
error No. Possible cause(s) / Solutions
ERR
The systolic pressure was determined, but then
the pressure in the cuff went down to less than
0 mmHg (diastolic blood pressure can’t be meas-
ured). The tube may have loosened after the systo-
lic pressure has been determined. Further possible
reason: Pulse could not be detected.
ERR
Unnatural pressure impulses influence the meas-
urement result. Reason: the arm was moved during
the Measurement (Artefact)
ERR 5
The measured reading indicated an unacceptible
difference between systolic and diastolic pres-
sures. Take another reading following directions
carefully. Contact your doctor if you continue to
get unusual readings.
Other possible errors and their solutions
If problems occur when using the device, the following points
should be checked:
EEE
2
Summary of Contents for M1-S-1
Page 19: ...19 ...
