19
MOUNTING THE FRAME
Mounting Stand Adjustment
When mounting a racquet, adjust the
Mounting Stands so that the white Racquet
Supports on top of the Mounting Stands fi t
inside the hoop of the racquet. Lower the
racquet over the Racquet Supports and
adjust the Mounting Stands until the sup-
ports just make contact with the inside sur-
face of the racquet at the head and throat.
There is an arrow on the face of each Ad-
justment Knob on the Turntable indicating
the turning direction that will “Tighten” the
mounting points by moving the 2pt Mount-
ing Stands further apart to bring the Racquet Supports closer to the inside surface of the
racquet at the head and throat. Turning the knobs in the opposite direction will move the
Mounting Stands closer together and will allow the Racquet Supports to move away from
the racquet frame.
Adjusting the Inner Racquet Supports
The white Racquet Supports are adjustable to accom-
modate all racquets and provide maximum support to
the racquet frame. Screw the pads up or down so they
contact the frame at a maximum height without blocking
the grommet holes.
Racquet Hold Down Clamp Operation
With the lever in the up position, insert the Racquet Hold
Down Clamp Pin into the hole in the center of the Mount-
ing Stand. Lower the Hold Down Clamp until it just makes
contact with the surface of the racquet. Using slight palm
pressure on the Hold Down Clamp depress the racquet
Hold Down Lever completely to secure the racquet frame
to the Mounting Stand.