BD-SS and BDT-SS CS-2516 09/01/06
Page 4 of 4
Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
Phone: 203-484-7161
Fax: 203-484-7118
www.gamewell-fci.com
A Honeywell Company
© 2006 Gamewell-FCI
Specifications and wiring information are provided for information only and are
believed to be accurate. Gamewell-FCI assumes no responsibility for their use.
Data and design are subject to change without notice. Installation and wiring
instructions shipped with the product shall always be used for actual installation.
For more information, contact Gamewell-FCI.
Alignment Adjustment Locations
Housing Screw Locations
Ordering Information
BD-SS
Intelligent beam smoke detector
BD-SSA
Same as BD-SS with ULC Listing.
BDT-SS
Intelligent beam smoke detector with integral
sensitivity test.
BDT-SSA
Same as BDT-SS with ULC Listing.
BEAMLRK
Long range accessory kit (required for applica-
tions in excess of 230 ft/70 m).
BEAMMMK
Multi-mount kit (provides ceiling or wall mount
capability with increased angular adjustment).
BEAMSMK
Surface-mount kit.
RTS451
Remote test station.
RTS451KEY
Remote test station with key lock.
BEAMHK
Heating kit for use with the transmitter/receiver
unit of BDT-SS. For prevention of condensation.
BEAMHRK
Heating kit for use with the reflector of BDT-SS.
For prevention of condensation.
Parts List
Item
Quantity
Transmitter/receiver unit ....... 1
Paintable trim ring ................. 1
Reflector ................................... 1
Plug-in terminal blocks ........... 3
Isolator shunts ......................... 2
Instruction manual .................. 1
Orange sticky paper ................ 1
Acclimate™ is a trademark of System Sensor, a Honeywell company.
SmartScan™ is a trademark of Gamewell.