11
7100 Series Installation/Operating Manual —
P/N 9000-0447:J 08/28/08
System Overview
Optional Modules
1.4.6 LDM-7100 Remote LED Driver Module
Each LDM-7100 LED Driver Module provides the 7100 Series control panel output for thirty-three
(33) remote LEDs. Three (3), LDM-7100 Modules may be mounted in a single annunciator for a
maximum total of 99 points per annunciator.
The annunciator may be located up to 4,000 feet from the panel and up to four (4), additional
annunciators can be connected, configured identically with the first.
1.4.7 INI-7100-UTP, Intelligent Network Interface, Unshielded,
Twisted-Pair
The E3 Series
®
Broadband Network interface to the 7100 FACP uses copper wire network
terminations only. It occupies one node on the E3 Series Broadband Network.
OR
1.4.8 INI-7100-FO, Intelligent Network Interface, Fiber-Optic
The E3 Series Broadband Network interface connection to the 7100 FACP uses either fiber-optic
cable or copper wire network terminations. It occupies one node on the E3 Series Broadband
Network.
NOTE:
The Network Graphic Annunciator Module (NGA) is required when more than seven (7),
7100 Series panels are networked. For additional information , refer to the
E3 Series Broadband
Installation/Operating Manual P/N 9000-0575
.
