Gametime Tire Swing Installation Instructions Manual Download

Page: 5 / 6

PAGE 4

NOTE:

1.) OWNER/OPERATOR SHALL INSTALL AND

MAINTAIN PROTECTIVE SURFACING WITHIN THE
USE ZONE (U.S.) OR PROTECTIVE SURFACING

ZONE (CANADA) OF ALL PLAY EQUIPMENT TO

COMPLY WITH ASTM F-1292 AND ASTM F-1487
(U.S.) or CAN/CSA-Z-614 (CANADA).

2.) SOLID OUTSIDE BORDER REPRESENTS

MINIMUM REQUIRED ASTM USE ZONE AND CSA
PROTECTIVE SURFACING ZONE FOR SWING
FRAME SHOWN.

3.) DASHED LINES REPRESENT CSA

NO-ENCROACHMENT ZONE (CANADA ONLY).

4.)

*EACH ADDITIONAL CONNECTED SWING

FRAME BAY INCREASES THE USE ZONE
SURFACING DIMENSIONS BY 14'-5 9/16" [4.41M].

(NOT AVAILABLE IN CANADA).

TOP VIEWS

10778

10777

[1.80M] ALL AROUND

14'-5 9/16" [4.41M]

4'-6" [1.37M]

11'-0" [3.35M] RADIUS

(TYPICAL)

5'-10 7/8" [1.80M] RADIUS

(TYPICAL)

*38'-6 1/16" [11.74M]

33'-9 3/4" [10.31M]

Summary of Contents for Tire Swing

Page 3: ...E HOLE DEPTHS INDICATED ON ALL GROUND PLANS ARE MEASURED FROM THE FINISHED SURFACE SEE DETAIL 005 ALL FOOTING DIMENSIONS ARE BASED ON LEVEL FINISHED SURFACE 10777 2 0 60 96cm DIA x 2 6 76 20cm DEEP 4 REQUIRED SEE DETAIL 005 2 0 60 96cm DIA x 2 6 76 20cm DEEP 4 REQUIRED SEE DETAIL 005 CONCRETE REQUIRED PER GROUND HOLE 17 CUBIC YARDS 13 CUBIC METERS ...

Page 4: ...DING MORE THAN TWO FULL THREADS BEYOND THE FACE OF THE NUT SHALL BE CUT OFF FLUSH FILED SMOOTH AND TREATED TO PREVENT CORROSION NOTE AFTER ASSEMBLY IS COMPLETE PEEN TEE NUTS AND FLATWASHERS TO MATCH RADIUS OF PIPE 13 DETAILS for 1 0 INCH 0 CM 1 2 3 6 4 5 7 8 9 10 12 11 PAGE 14 15 2 3 4 5 6 10777 10778 5 ...

Page 6: ...DING MORE THAN TWO FULL THREADS BEYOND THE FACE OF THE NUT SHALL BE CUT OFF FLUSH FILED SMOOTH AND TREATED TO PREVENT CORROSION NOTE AFTER ASSEMBLY IS COMPLETE PEEN TEE NUTS AND FLATWASHERS TO MATCH RADIUS OF PIPE 13 DETAILS for 1 0 INCH 0 CM 1 2 3 6 4 5 7 8 9 10 12 11 PAGE 14 15 2 3 4 5 6 10777 10778 6 ...