MENU
C2
C1
II. Product Parameters
Name of the product
Model of product
Supporting platform
Bluetooth
Battery type
Input
Packaging size
Product size
Bluetooth controller T1d
T1d
Android, iOS
Bluetooth 4.0
600mAh, polymer lithium battery
5V-1A
185*180*80mm
162*101*67mm
Bluetooth controller T1d, support Bluetooth 4.0 wireless connection. It is
suitable for Android devices (version 4.3 or above) and Apple devices
(system version iOS8.0 or above). This product fully intelligent and
automatically identifies various models of equipment, no need to
manually set Android or iOS mode, connect and play.
Bluetooth controller
Operating Manual
I. Product Introduction
Troubleshoot
Product notes
III. Concept of Controller
IV. Function Description
Pair
Power display
Charging port
Power button
Photo button
Video button
Note: The factory default setting of the controller is the "America hand". The left
joystick control the height and the direction, the right joystick control the forward,
backward, and left direction of the flight.
1. Turn on and connect the controller
1) Short press the button to turn on, if it starts successfully, the ABXY
button of the controller will be always on.
2) Power display LED flickers slowly; Enter the Bluetooth mode directly
to wait for the APP connection;
3) Enter the flight control APP to connect the controller;
4) After connecting, the power display LED is always on and show the
quantity of electricity.
5) If the controller has been connected to other phones, press the "Pair"
button of the controller to force the controller to enter the state of waiting
match.
2. Turn-off
1) Long press the power button for 3-5 seconds, shut down the
controller, turn off all the LED lights;
3. Automatic turn-off
1) The controller is in connecting state, if it is idle for more than 5
minutes, the controller will turn off automatically.
2) The controller is in disconnecting state (waiting for connection), if no
connection for 2 minutes, the controller will turn off automatically.
4. Check the power
After the controller connected successfully, the LED lamp will show
current power information.
The LED lamp group shows the proportion: Fully bright is about 75% to
100%; 3 lights are about 50% to 75%; 2 lights are about 25% to 50%; 1
light is about 1% to 25% .
5. Low battery alarm
1. When the available power is lower than the low power alarm voltage,
the LED light group lasts double flash;
2. When the available power is lower than the battery protection voltage,
the controller will turn off automatically.
6. Battery charging
1) LED lights 1-4 flicker slowly during charging;
2) When the charge is over (full), the LED light group is always on;
Disconnect the charging cable after charging.
7. Reset
Press the pinhole on the back of the controller quickly with the paperclip,
to force the entire controller to power off once, and reboot.
8. Firmware upgrading(OTA)
Connect the controller through the mobile phone APP Bluetooth, to
process OTA upgrade. Support Android 4.3 +, iOS8.0 + system; App
download address: www.gamesirhk/t1d
1) After entering the upgrade mode, the LED keeps on Lantern Dance,
and waits for the upgrade.
2) After the upgrade is completed, turn off the machine and restart it
automatically.
1. When you can't start the machine, Maybe the built-in battery is out of
power. Please recharge the controller with the USB line and start up
again.
2. If the controller crashed or dropped please don't keep it far away from
the device, or reconnect.
3. Factory setting (reset): There is a small hole on the back of the
controller, press it down with a toothpick or other hard bar object, press
RESET key to restore the factory setting.
1. Avoid strong vibration, don't disassemble, refit, repair by yourself.
2. Avoid storing in humid, high temperature, fumes and other places
3. Avoid the water or other liquids entering the inside of the controller, it
may affect the controller function.
4. There are batteries inside, do not drop the controller into the fire, there
is a danger of explosion.
5. The charging voltage of this product is USB 3.7-5.5V DC power
supply (ordinary Android mobile phone charging power can be used
directly), otherwise it may not be able to charge or cause damage.
6. Children need to use this product in the custody of an adult.
7. If there is a quality problem or suggestion, please contact the seller or
after sales personnel, and see the contact information on the outer
packing.
Lifting
Turn left
Turn right
Back
Left
Right
Falling
Custom key
Custom
key
Custom
key
Custom
key
Custom
key
Right joystick
Right joystick
Left joystick
Left joystick
Custom
key
Custom key
