GamerModz
PS4
–
SPS-X3 Ver 4.0
7
Burst mode
Burst Mode allows you to set the number of shots fired with each trigger pull. Your GamerModz SPS-X3
Controller comes with 4 Settings for Burst Mode.
To enable Burst Mode - Rapid Fire must first be enabled (See Page 2 “Toggle Between Rapid Fire Modes”) –
Hold Down the Right Trigger and Tap Right on the D-Pad the number of times corresponding to the
Burst Mode below. Then Release the Right Trigger . The PS4 Controller LED will flash the number of times
corresponding to the mode selected, indicating that Burst Mode has been toggled on.
To disable Burst Mode Hold Down the Right Trigger and Tap Right on the D-Pad 6 or more times,
then Release the Right Trigger . The PS4 Controller LED will flash one time to indicate that Burst Mode has
been toggled off.
MODE 2 ----------------- X
2
2
ROUND BURST
MODE 3 ----------------- X
3
3
ROUND BURST
MODE 4 ----------------- X
4
4
ROUND BURST
MODE 5 ----------------- X
5
5
ROUND BURST
TURN OFF -------------- X
6
DISABLE
BURST MODE
Notes:
-
You must have Rapid Fire Enabled to Enable Burst Mode. If Rapid Fire is not Enabled, Enabling Burst
Mode will fail.
Gameplay Tips:
-
Combine Burst Mode with a Weapon’s Optimal Max Fire Rate to increase accuracy and save on Ammo.
, then
Hold
Tap
X
Mode #, then
Release
