Installation Instructions
25
SETTING UP THE GAME WINNER LADDER STAND ONTO THE TREE
STEP 1:
Select a straight healthy tree that is larger than 9-inches in diameter and smaller
than 24-inches in diameter at attachment height.
STEP 2A:
Attach two (2) Stabilizer Straps (#23) to both the left and right side of the seating
platform supports where tree brace meets the support as shown in Figure 17a.
Attach by looping strap loop around support and insert end of strap through strap
loop. Pull tight so strap is secure on side of seating platform support and positioned
next to tree brace. Repeat for strap on other side of seating platform support.
Figure 17a
Install Stabilizer Straps
WARNING! STOP! Make sure that you are wearing you full-body fall arrest harness. Failure to follow
these instructions may result in serious injury or death!
WARNING! Prior to attempting to use this, or any other Game Winner product(s), you must take a
moment and become familiar with its setup and installation at ground-level. You must practice
installing, setting-up using and removing product(s) and full-body safety harness at ground-level
prior to attempting to use it at heights above ground-level. Once you have become thoroughly
knowledgeable and comfortable with this Game Winner product(s) setup, installation use and
removal at ground-level, you’re now ready to use it at heights above ground-level. Failure to follow
these instructions may result in serious injury or death!
