background image

General Instructions

SAFETY:

• Safety is dependent on the proper installation and servicing of this docking station. It is 

important to read and follow all instructions before installing this product.

• Proper installation requires a good understanding of automotive electrical systems and is 

recommended to be performed by qualified technicians only.

• There are no adjustments or user serviceable parts within the docking station. Opening the 

docking station will void the product warranty

• Do not install equipment or route wires in the deployment path of any air bag, or where it 

may interfere with critical safety or operating controls of any vehicle.

POWER:

• The power maximum input should be 19vdc/12.1A. Use a recommended power supply for 

the dock. 

WIRING:

• Gamber-Johnson does not recommend relying on a cigarette socket adaptor for powering 

vehicle docks. We recommend hard wiring the power adapter using a good clean ground 
direct from the vehicle battery neg(-) post, and pos(+) supply from a fused 12vdc location 
also directly from the vehicle battery. All peripherals connecting to the docking station 
requiring external power should get power and ground from the same location as the dock.

• Visit 

www.gamberjohnson.com

for a copy of our general wiring and  troubleshooting guide.

Proper Use and Care:

• Proper care and use of this product is critical to maximize safety and to prevent damage to 

the docking station and laptop.

• Do not store, place or drag any object on top of the docking station.
• Visually inspect the docking station and laptop for any defect before using the dock or 

docking the laptop. Do not use if damaged.

• Do not attempt to dock a computer or dock with wet contacts

Environmental:

• Storage:  -40°C to 85°C (-40°F to 185°F)
• Operating:  -21°C to 50°C (-5.8°F to 122°F)

SERVICING [ENTRETIEN]:

• If the dock does not work as intended, please contact Gamber-Johnson for troubleshooting 

or to schedule a service

. [Si le dock ne fonctionne pas comme prévu, contactez 

Gamber-

Johnson

pour le dépannage ou pour planifier un service.]

• Servicing of the dock should be only done by authorized service center personnel. 

Unauthorized servicing of the dock will void its warranty.

[L'entretien du dock ne doit être 

effectué que par le personnel du centre de service autorisé. Un entretien non autorisé du 
dock annulera sa garantie.]

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, 
special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in 
vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, 
electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its 
products not consistent with original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as 
endorsed through the Gamber-Johnson Certified Installer Program.

2

Summary of Contents for TrimLine 7300-0600-03









Reviews: