2 / 5
Two Rear Support Clips must be assembled at the time of installation.
Attach each Rear Support & Brace to Tee Nut located in channel on back edge of
Notepad™V-LT using a #8-32 x .38 Socket Head Screw.
Attach the Long Rear Clip and Short Rear Clip to appropriate Rear Support & Brace
with a #8 external tooth washer, Flat Washer and a #8-32 x .38 Socket Head Screw.
The Notepad™V-LT Universal Cradle is designed to be used with Gamber-Johnson
motion attachments, poles and vehicle bases.
The Sliding Mount Bar feature allows side-to-side adjustment of cradle to desired
mounting position.
Four .25 Flat Washers and .25-20 x .62 long Hex Head Screws are supplied
in the hardware bag to secure motion attachments to the bottom side of the cradle.
Sliding Mount Bars on bottom surface
.25-20 x .62 Hex Head Screws
& .25 Flat Washers
Rear Support Assembly
Vehicle Mounting
Long Rear Clip
#8-32 x .38 Socket Head Screw
#8 External Tooth Washer, Flat Washer &
#8-32 x .38 Socket Head Screw
Short Rear Clip
#8 External Tooth Washer, Flat Washer &
#8-32 x .38 Socket Head Screw
#8 External Tooth Washer, Flat Washer &
#8-32 x .38 Socket Head Screw
