page 3
Assembly Instructions
Operation Instructions
Pier/Flat Mount
Note: There are specific types of screws
for specific surfaces. If unsure of the
appropriate type of screw to use on
your desired surface, please consult a
professional.
• Remove the flat mount bracket (C)
from the fixture (B) by removing the
two screws on the sides.
• Using the flat mount bracket (C) as a
template, mark where the four holes
will need to be.
• Drill four holes no larger than the
included anchors.
• Place the anchors into the holes and
secure the flat mount bracket (C)
using the provided screws.
• Attach the fixture (B) to the flat mount
bracket (C) using the two screws
removed earlier.
• Follow the Operation Instructions to
turn the lamp on.
4x4 Post Cap Mount
NOTE: For any post
other than 4x4, please
use the installation
instructions above.
• Follow the
installation
instructions above.
• When attaching the
fixture (B) to the flat
mount bracket (C),
slide the fixture (B)
over the bracket (C)
to the second set
of holes. This will
recess the bracket
about ¼ inch for a
nicer finish over a
4x4 post.
• Disconnect the top (A)
by removing the two
screws attaching it to
the fixture (B).
• Insert the GS Solar
LED Bulb by twisting
clockwise.
Replacement Parts
Replacement batteries and bulbs are
available at www.gamasonic.com or via
our Toll Free number: +1-800-835-4113.
Your Lamp can use the following bulbs:
D46WW05W – included bulb with Warm
White LEDs (2700K)
F30WW05W –Flame bulb with simulated
flame LEDs
Your lamp uses the following battery:
GS32V15
HIGH
LOW
OFF
HIGH
LOW
OFF
• Move the operation
switch to the Low or
High position according
to your preferences:
Low = softer light
and longer duration
High = brighter light
output
• Reattach the top
(A) to the fixture
(B) and secure
using the two
screws.
• The solar lamp
will automatically
operate at dusk.
HIGH
LOW
OFF
