page 3
Assembly Instructions
Replacing the
Solar LED Bulb
3"
1
. Detach the upper part of the
lamp as shown in (Fig. 1) by
turning it counterclockwise.
2
. Install the solar LED bulb
(Fig. 5). Turn ON the operation
switch (see Fig. 2.) by choosing
your desired brightness level:
LOW -
last longer using dimmer
light.
HIGH-
Brighter light output
.
3
. Reassemble the upper part of
the lamp by placing it on top of
the 4 hinges, and then turn it
clockwise.
4
. Install the lamp onto your
existing 3” post, using the
screws provided (Fig. 3.).
5
. Screw in the Acorn or Eagle Finial
on top of the lamp (Fig. 4).
The Solar LED Bulb is designed to last up
to 10 years, however if it is not working,
or if you want to use a different color
temperature bulb, you can replace it with
a new GAMA SONIC Solar LED Bulb.
1
. Detach the upper part of the
lamp as shown in Fig. 1 by
turning it counterclockwise.
2
. Make sure the operation
switch is in the OFF (“O”)
position.
3
. Remove the existing bulb by
turning it counterclockwise
Fig 5.
4
. Install the new GS Solar LED
Bulb by turning into the
bulb socket clockwise.
5
. Reassemble the unit
by reversing the above
procedure
NOTE: When installing the GS
Solar LED Bulb, hold it from its
silver base not by the glass .
Fig. 1
Fig. 5
Operation Switch
Fig. 2
Fig. 4
Fig. 3
