4
5. Install the light cap to the lamp fixture
[Fig.6]
6. Install the ceiling mounting bracket at the desired location
[Fig.7]
NOTE:
Before installing the solar panel, make sure to switch the On/Off switch to the ON
position, located under the solar panel.
7. Install the solar panel in a position where it will be exposed to the sun,
make sure the wire can reach the lamp
[Fig.8].
8. Connect the wires together and tighten it firmly
to avoid water getting inside the connection.
9. Place the Remote-Control Sensor on the underside
of the location for the solar panel, where is can be
exposed for clear operation.
Install by pealing the adhesive cover and attaching it to the surface.
[Fig.9]
10. Hang the remote-control case using one screw.
The remote-control slides in and out
from the bottom, see
[Fig.10]
for more details.
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10
