4
Flat installation (Installing the lamp post without anchor):
EZ Anchor Installation Instructions:
9.3 Place anchor in desired location and apply downward pressure while turning
the Turning bar clock wise.
9.4 Occasionally check the anchor Level Tool to ensure your digging is straight.
9.5 Stop turning once Part (I) is flat with ground level.
9.6 Remove the Turning Bar(G).
9.7 Screw the fixture to the Anchor.
8.1 Mark three holes with the base plate as a
template. With an electric drill, drill the
holes into concrete. Assemble with the
hardware provided.
8.2 After assembling attach the three
decorative caps provided.
and screw the fixture to the base.
9.2 Insert the Turning bar (G) in
the hole through the anchor
stake (H) as shown.
9.1 Attach Part (E) to Part (F) Using the
four small screws from, as shown.
I
G
H
