page 3
Step 1. Mounting Bases to lamp and/or solar panel
Our flood light boasts multiple installation options. These instructions will explain how to
assemble the different pieces to each other. Please use this as a guide and choose the mounting
option/combination that works best for your situation.
This product comes with two stake mounts (Part D) and one flat mount (part E). Choose the one(s)
that fit best for your desired mounting location.
1. Part A can be attached to Part F
(Fig. 1)
or G
(Fig. 2)
by sliding
the tapered end of the wedge into the groove at the bottom
of the lamp or solar panel.
NOTE:
Push the part into the groove
firmly so it does not easily slide out and tighten set screw.
2. Attach Part A to Part D or E
(Fig. 3)
and secure by screwing Part
H clockwise into the threaded section.
3. You can adjust the angle of the completed assembly by
loosening the screw (Part H) and tilting the product to the
desired angle. Re-tighten Part H to secure product in the new
position.
4. If you plan to attach one of the mounting bases to both the lamp
and solar panel, repeat steps 1-3 to have a mount for each of Part
F and G.
5. If using Part E, drill two holes into your mounting location using
the base as a template. Secure the base using the hardware in
the package (Part J).
6. If using Part D, firmly insert the stake into the ground of the
desired location.
continue
Fig. 1
Fig. 3
Fig. 2
