NOTE:
The following steps are for reference only. Consult
your local hardware store for the best installation method
for your surface.
1. Using the fixture (D) as a template, mark two holes in
the desired mounting location.
2. Drill a hole in the marked
locations and insert the
anchors in the holes.
3. Secure the fixture to
the wall using the
provided screws.
4. Insert the lens (C) into
the fixture (D).
5. Install the GS Solar LED Bulb into the top (B) by
twisting it clockwise.
Note:
make sure to hold the bulb by its base and not
the glass.
6. Place the top (B) on the
fixture (D) and secure
it with the provided
screws.
7. Turn the lamp on to
your desired setting.
8. Place the finial (A) on top
of the top (B) and secure by
pressing it down.
1. Install the GS Solar LED Bulb into the top (B).
2. Locate the operation switch on the upper portion of
the top (B).
3. Turn the operation switch to the Low or High position
according to your preferences:
Low = Softer light output and longer duration
High = Brighter light output
4. The solar lamp will automatically operate at dusk.
Replacement Batteries and Bulbs are available at
www.gamasonic.com or via
our Toll Free number: +1-800-835-4113
Your Lamp can use the following bulbs:
C37WW10W – included bulb with Warm White LEDs (2700K)
C37BW10W – bulb with Bright White LEDs (6000K)
F30WW05W – Flame bulb with simulated flame LEDs
Your lamp uses the following battery:
GS32V15 - Li-Ion 3.2V/1500mAh
Assembly Instructions
Operation Instructions
Replacement Parts
page 3
Operation Switch
