4
Symbols found in the instruction manual
The following symbols are found in the instruction manual:
Danger
It dr
aws the user’s attention to such sources of danger which
may cause injury to the user
during the work performance
with the cultivator
.
Warning
It draws the attention to such sources of danger which may
cause damage to the cultivator in case of improper use.
Arrangement of main parts of the cultivator
1 – Handle bar bracket, 2 - Handle, 3 – Clutch lever, 4 – Handle, 5 – Clutch cable
6 – Depth limiter, 7 – Transport wheel, 8- Throttle control, 9 – Throttle cable
10 – Engine, 11 - Deflector, 12 – Tine
Figure: 1.
Assembly
Warning
When unpacking the machine, be especially careful not to
damage the clutch cable.
Assemble the cultivator in accordance with the figures found
in the instruction manual.
1. Setting the plough iron bracket
1. In order to facilitate assembly of cultivator, place a
support of 10-15 cm height under the front section of the
guard (see: Figure 2).
Figure
2
10
– 15 cm