Gama Garden GLM-40P Easy, Instruction Manual

Page: 18 / 21

Acquaer Ltd. www.gamagarden.eu
H-
4900, Fehérgyarmat, Szatmári utca 11.
18/21
CHANGE OIL (see A8)
See the Technical data table for the oil to be used.
WARNING! Drain oil while the engine is warm, be careful not to touch
the hot engine nor the drained oil.
a) Place engine level.
b) Clean around oil fill
c) Remove the fillercap (1).
d) Have a container ready to collect the oil.
e) Tip the lawnmower on its left side so that the oil will drain from the oil fill.
f) Place the lawnmower level and top up with new oil.
g) Check the oil level on the dipstick (2). Oil should be at
“
MAX
”
mark.
h) Close the fillercap(1) and wipe off any spilled oil.
NOTE: The oil capacity is about 0.55liter.
CLEAN SILENCER AND ENGINE
Silencer must be cleaned when the engine is cold.
a) Remove any grass debris or dirt that could cause fire from the silencer and its
guard, using a brush or compressed air.
b) Clean the cylinder and the cylinder head fins to ease the engine cooling and
prevent overheating.
c)
Clean the plastic components with a sponge soaked in water and detergent.
AIR CLEANER SERVICE
（
see A9
）
Keep the filter clean and the oil saturated. Replace it if broken, cut or damaged.
IMPORTANT: Never use compressed air to clean the filtering element.
a) Clean around the filter cover.
b) Release the rear clip; remove the cover and the foam element.
c) Wash the foam element in liquid detergent and water. Squeeze dry in a clean
cloth.
d) Saturate the foam element with 2 table-spoons of clean engine oil and squeeze it
a few times to distribute the oil evenly.
e) Remove excess oil with a clean cloth.
f) Clean the interior of the air cleaner housing from any dust and grass, making sure
that they do not enter the intake manifold.
g) Install the foam element in its housing and close the cover.
If the foam element has been replaced, proceed to oil the new filter as described
above in sections d), e), f), g).
SPARK PLUG SERVICE (See A5)
a) Remove the spark plug (1) using a spark plug socket wrench (2).