Ezy-Wash
®
Food Service Tapware
PRODUCT CODES:
-
TF78WC-ESS
SPECIFICATIONS
The Galvin Specialised Ezy-Wash
®
product range is used for hand sinks, bar sinks and more.
The wall mounted hot and cold lever mixer features a polished chrome plated body for optimum stability.
This Ezy-Wash
®
product is laminar flow (not aerated).
Our highly sought after lever handle design is easily operated with elbows, wrists or hands.
Quick action SBA’s include a brass jumper valve component, with red and blue indicator buttons on 150mm
lever action handles.
This unit is supplied with a wall mounted stainless steel cable to provide strength to the spout when using
the hook for bucket filling.
IMPORTANT
: All Ezy-Wash
®
product taps are tested in accordance with AS/NZS 3718 and leave our premises in
good working order.
TECHNICAL DATA
Inlet
½” BSP – Female
Outlet
Laminar Flow
Headwork
Jumper Valve
Working Pressure Range (kPa)
Min
50
Max
500
Working Temperature Range (°C)
Min
5
Max
80
Nominal Flow Rate (LPM)
7.5
Finish
Chrome
NOTE:
Galvin Specialised continually strive to improve their products. Specifications may change without notice.
TOOLS REQUIRED
Power drill, Spanner & Hex Key
Thread tape or Sealant.
