v
Version 1, 27
th
October 2020 Page
3
of
4
3. Secure Inlet Body
−
Tighten the screws on the inlet body as shown. Do not overtighten.
−
Once fitted, check installation for leaks and correct operation.
TROUBLESHOOTING
PROBLEM
CAUSE
RECTIFICATION
Inconsistent flow
Blocked top assembly
Remove top assembly and clean
Water is not flowing from tap
Water is turned off
Turn on water
Continuous flow
Top assembly loose or
internally obstructed or
damaged
Remove top assembly, clean with water
and re-grease spindle if required
Button hard to press
The mains pressure may be
too great
Reduce to below 500kPa (70PSI). Re-
grease spindle if required
Not Supplied
