Version 1, 3 August 2017, Page
1
of
5
Version 2, 3 August 2017, Page
1
of
5
Ezy-Wash
®
Pre-Rinse Tapware
PRODUCT CODE:
-
TF81HJS
-
TF81HJP
TF81HJS TF81HJP
SPECIFICATIONS
Galvin Specialised recommends the installation of strainers and pressure reducing valves prior to installing
the pre-rinse unit to ensure clean consistent water supply. Debris or poor water quality could cause the
trigger to seize or fail to seal.
This pre-rinse unit has a 6 star WELS rating, the Pot Filler attachments are 0 star to allow fast pot filling.
TECHNICAL DATA
Inlet
½” BSP – Male
Outlet
TF81HJS
Trigger Spray
TF81HJP
Trigger Spray & Pot Filler
Headworks
TF81HJS
Jumper Valve
TF81HJP
Jumper Valve
Working Pressure Range (kPa)
Min
100
Max
500
Working Temperature Range (°C)
Min
5
Max
65
Nominal Flow Rate (LPM)
TF81HJS
3.5
TF81HJP
15
Finish
Chrome
NOTE:
Galvin Specialised continually strives to improve their products. Specifications may change without
notice. Higher temperature or pressures could result in premature failure and void the manufacturer’s warranty
.
TOOLS REQUIRED
Adjustable spanner
Hex key
Power drill
