© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 11 January 2022, Page
4
of 5
ADJUSTMENT OF THE MIX TEMPERATURE (SHOWER MIXERS)
1. Set the handle to cold position.
2. Unscrew the tamper
proof screw from handle.
Pull out handle assembly
from the body
3. Remove the upper brass ring.
ke sure the ntr r d d esn’t
rotate during the next steps.
4. Remove the lower brass ring
(temperature setting ring) and
rotate the brass ring clockwise
to increase temperature or
anti-clockwise to decrease.
Refit to spline in new position.
5. Reposition the upper
ring in the same
position against step.
6. Once set, reverse step 2 to
reassemble.
7. Re-test temperature to ensure
correct operation.
