ViscoSite VL800 Viscometer
Operating Manual
ViscoSite VL800 Viscometer
Galvanic Applied Sciences, Inc.
Email: [email protected]
Phone: (978) 848--2701
Operating Manual Rev: 2.0E
Toll-Free: 1 (866) 252-8470
Page 114 of 132
9 ViscoSite System Technical Specifications
9.1 Performance Specifications
Range
4 (four) decades from 0.1
–
1 000 000
cP x g/cm
3
(depends on transducer
configuration) (See Section 2.2)
Accuracy
±
2% of reading
Reproducibility
±
1% of reading
Repeatability
±
0.25%
of reading
Response Time
Real Time Analysis
Analysis Frequency
~
1 Hz
Table 9.1: Performance Specifications
9.2 Communications / Interface
Outputs
3 0-10VDC / 2-10VDC / 0-20mA / 4-20mA isolated
analog outputs (scaled to range, user configurable)
2 SPDT Alarm Relays, 4A @30VDC / 120VAC OR 2A @
240VAC
1 USB 2.0 Port
1 Combined RS232c/RS485 isolated Serial port
1 Ethernet Port (RJ-45), 10/100 Mb/s, half duplex
Communications
Modbus RTU across Ethernet, USB, Serial Ports
Inputs
1 0-10VDC / 2-10VDC / 0-20mA / 4-20mA isolated
analog input for density transducer (scaled to
range, user configurable, no sourcing current)
2 RTD Inputs (3 wire, PT100) (Transducer Probe
(sensor tip) RTD, Transducer Block/RTD), factory
configured / calibrated
Operator
Interface
1 LCD Screen 4-line x 20 column, white print on blue
with Front Panel membrane keypad (not
intrinsically safe)
4 Front Panel Status LEDs
1 ViscoSite software program for local and remote PC
configuration of ViscoSite transmitter
Table 9.2: Communications / Interface
