Galvanic Applied Sciences MONITEK MESSENGER, User Manual

Page: 57 / 87

-55-
6.6 On-Line Help menus and related contents
This section describes the HELP menus and related contents.
Software HELP menus
6.6.1 Main Menu
This menu helps in navigating to various Messenger options.
Choose Main Menu

Calibration Menu

Setup Results Menu

Setup Inputs/Outputs

Diagnostic Menu

Set Cleaning Event

Set Access Code

Set Access Level

Measurements screen
6.6.2 Set Calibration Menu
This menu is used to correlate raw data collected from the sensors (photo detectors)
corresponding to a specific standard or sample concentration. Up to 8 different
calibration data points can be stored for each of the four sensors read by the
instrument. From this information the instrument can construct a lookup table.
Choose Main Menu > Calibration Menu
Select the Sensor , which needs to be calibrated.
You have two calibration tables, Factory calibration and Process calibration
tables. Choose the desired calibration table, which needs to be changed by
selecting the respective button

Factory Calibration

Process Calibration
Note: Factory calibration table can be altered / viewed using FACTORY level
Access permissions.