MPI DC
34
All copying, even partial, of this manual is strictly forbidden.
RG66007970 - Rev 01
16.1
POSITIOnInG OF VIBRaTIOn DaMPeRS (aCCeSSORy)
16
SITInG
MPI DC
nO. OF VIBRaTIOn DaMPeRS
08 - 29
4
Vibration dampers
It is important to bear in mind the following aspects when choosing the best site for installing the unit:
- Size and origin of water pipes;
- location of the power supply;
- Solidity of the supporting surface;
- Avoid obstacles to the outflow of air from the fan which could cause back suction (see section on “installation clearance requirements”);
- Direction of prevalent winds: (position the unit so that prevalent winds do not alter the fan air flow)�
A prevalent wind blowing from a direction opposite to the fan air flow will reduce the maximum air temperature to a lower value than specified in the
operating limits,
A wind blowing in the same direction as the fan air flow will increase the minimum air temperature to a higher value than specified in the operating limits�
Also in the heat pump mode, wind may have the effect of reducing the unit's operating range�
- Avoid the possible reverberation of sound waves; do not install the unit in narrow or cramped spaces;
- Ensure adequate accessibility for maintenance or repairs (see section on “installation clearance requirements”)�
This device is not intended to be used by children or by people with physical, sensory or mental impairments, except under supervision. Make sure
that children do not have access to the device.
