WC66000496
All copying, even partial, of this manual is strictly forbidden
37
MOB - Cabinet for installation of the cassette in spaces without a suspended ceiling
RAL 9010 Color
BAR - Spigot for introduction of mixed renewal air
• The BAR accessory is a fitting for Ø100 pipe to be connected to the inlets located on the unit.
• It is possible to insatll 3 accessory BAR according to the user's needs.
• The installation of accessory BAR is compatible with accessory PAR and PMAA.
PAR - Plenum for introduction of unmixed renewal air (not use with MOB)
• The PAR accessory consisting of a duct and a plenum: fresh air is introduced into the installation room bypassing the heat
exchanger by means of a supply fin of the unit.
• It is possible to insatll 1 or 2 PAR according to the user's needs.
• The installation of accessory PAR is compatible with accessory BAR.
PMAA - Plenum for outler air (not use with MOB)
• The PMAA accessory is a plenum to connect the rectangular outlets located on the unit to the round distribution ducts.
• It is possible to insatll 1 or 2 PMAA according to the user's needs.
TP- Plastic cap
Plastic cap Ø 200 mm for the closing on the PCOF, of the air outlet not used.
VK - ON-OFF 3-way motor driven valve with hydraulic kit
It controls the room temperature by stopping the water flow through the heat exchanger. The kit, available for all models with
standard heat exchanger or additional DF heat exchanger, comprises the following components: Valve body: 3-way with incorpo-
rated by-pass (4 connections), 230V single-phase electro-thermal normally closed ON/OFF servo control, it acts directly on the
valve shutter. Hydraulic plumbing kit made with copper piping and brass connectors.
VKM- 3-way motor-driven modulating valve complete with hydraulic kit
It controls the room temperature by stopping the water flow through the heat exchanger. The kit, available for all models with
standard heat exchanger or additional DF heat exchanger, comprises the following components: Valve body: 3-way with incorpo-
rated by-pass (4 connections), 24V electro-thermal normally closed modulating servo control. It acts directly on the valve shutter.
Hydraulic plumbing kit made with copper piping and brass connectors.
KV - 2-way motor-driven ON/OFF valve complete with hydraulic kit
It controls the room temperature by stopping the water flow through the heat exchanger. With 230V electro-thermal actuator.
Available for all models, with standard heat exchanger or additional DF heat exchanger.
KVM - 2-way motor-driven modulating valve complete with hydraulic kit
It controls the room temperature by stopping the water flow through the heat exchanger. With 24 V electro-thermal actuator.
Available for all models, with standard heat exchanger or additional DF heat exchanger.
VPIK - 2-way valve - pressure independent - 230 V - ON/OFF with hydraulic kit
It controls the room temperature by stopping the water flow through the heat exchanger. With 230V electro-thermal actuator.
Available for all models, with standard heat exchanger or additional DF heat exchanger.
VPIKM - 2-way valve - pressure independent - MODULATING, with hydraulic kit
It controls the room temperature by stopping the water flow through the heat exchanger. With 230V electro-thermal actuator.
Available for all models, with standard heat exchanger or additional DF heat exchanger.
