ENG - 18
– Use the appliance in the working position only at places with no risk of turning over and in
sufficient distance from heat sources (e.g.
heater, stove, cooker, oven, grill
), flammable
objects (e.g.
curtains, drapes, etc.
) and wet surfaces (e.g.
sinks, wash basins, etc.
).
– Do not place the appliance near objects or under objects which could get damaged by steam,
e.g. walls, kitchen cupboards, sideboards, paintings, or curtains. Leaking steam could damage
them.
– Do not use the appliance in an environment saturated with explosive or flammable steams.
– There must be water in the electric kettle before putting into operation. Do not fill the electric
kettle with water if it is on the stand.
– Do not touch outer surfaces during operation of the kettle, they are hot and there is a risk
of getting burned.
Do not touch thel lid during and after cooking!
– It is not permissible to adjust the surface of the extra attachment (e.g.
self
–
adhesive paper,
foils
, etc.)!
–
According to the type of your kettle, the surface is ceramic or glass. These materials are very
fragile, pay special attention when handling, operation, maintenance and storage to avoid
injury. Never use the kettle if it is broken, cracked or shows signs of any damage or fissure.
–
Make sure the sieve is fit on thorougly in the upper part of the kettle in order that it does not
fall to the bottom!
–
Before switching on the kettle ensure that the water level is between MIN and MAX marks
– Prevent injuries when handling (e.g.
by hot water, steam
).
– If you are not going to use the electric kettle for longer time, we recommend unplugging the
stand from power supply by taking the fork of the power cord out of the socket.
– The appliance is equipped with the heat safety lock which disconnects power supply if the
steam sensor fails, if water boils away or if an empty kettle is turned on. If it happens, unplug
the appliance from power supply and let it cool down. Do not fill the kettle with cold water in
order to cool it down quickly. It could reduce life of the heating element.
– Check the condition of the power cord of the appliance regularly.
– Never put the power cord on hot surfaces or do not let it hang over the edge of a table
or a work top. Plugging or pulling the power cord e.g. by children can result in tilting over
or drawing the appliance down and serious injury!
– The power cord must not be damaged with sharp or hot objects, open fire, it must not be sunk
into water or bent over sharp edges.
– If you need to use an extension cord, it has to be uncorrupted and it has to comply with the
valid standards.
–
Use this appliance only for the purpose for which it was designed as specified in this user‘s
manual. Never use the appliance for any other purpose.
– The producer is not responsible for damage caused by improper use of the appliance (e.g.
burning, scalding, fire
) and its guarantee for the appliance does not apply to situations when
the safety warnings above are not complied with.
DESCRIPTION OF THE CONTROLS
P1. ON/Off switch
P2. ON/OFF indicator light
P3. Water level scale
P4. Button for open hinged lid
P5. Hinged lid
P6. Multi-directional base
