Using the vacuum cleaner
Disconnect the charger connector from the socket
A5
and remove the vacuum cleaner
from the holder. Choose suitable accessories (
D
,
E
) according to the type of the cleaned
surface. Slide the selected adapter end-to-end to the hole in the vacuum cleaner (Fig. 4).
You can turn the vacuum cleaner on and off by the switch
A1
. Let the vacuum cleaner
recharge as soon as its suction performance is weaker. In everyday use of the appliance,
let the vacuum cleaner connected to the charger. In this way the appliance will always be
fully loaded. Battery overcharging is not possible. If you are not present for longer time
(more than one day), remove the charger from the electric socket to save energy.
Vacuuming dry impurities
Select the suitable accessories (
D
- brush adapter for cleaning fine surfaces,
E
- slot
adapter for cleaning corners and narrow gaps). Slide the selected adapter end-to-end to
the hole in the vacuum cleaner. Remove the adapter in the opposite direction.
Emptying the dust container
If the amount of impurities in the container reaches the
MAX
gauge, it has to be emptied.
Release locking of the container
B
by pressing the
A3
button (Fig. 5) and remove it from
the vacuum cleaner by tilting (Fig. 6). Pull out the filter
B1
and the filter protector
B2
from
the container (Fig. 7), then place the container over a dustbin and empty it into common
municipal waste. Slide the protector and the filter back to the container end-to-end. Put the
container to the vacuum cleaner in the opposite direction and secure it by snapping in the
locking button
A3
. For sanitary reasons we recommend emptying the container outside
housing premises.
Cleaning the dust
container and cleaning the filter
After about 5 emptying of the container we recommend complete cleaning of the suction
system from the settled dust. Clean all parts (i.e. the container, the filter protector and
the filter) in running lukewarm water (e.g. using a cloth or a soft brush) and let it dry
completely. Re-assemble individual parts in the opposite direction after it is completely dry.
Filter replacement
Disassemble the parts of the cleaner for changing of the filter. Slide the new filter on and fix
it thoroughly reversely.
Storing accessories
You may put the accessory (
D, E
) into the holder
C
, orto a safe place. Store the adaptor
F
on a safe, dry and dustless place inside the house, keep it out of reach of children and
persons sui juris.
IV. MAINTENANCE
Disconnect the charger from the appliance before any maintenance. Store the vacuum
cleaner at a dry place, far enough from heat sources (e.g.
fireplace, stove, heating
element
) and protect it against weather conditions (e.g.
rain, sunshine
). Treat the surface
of the vacuum cleaner and the charger (only when disconnected from the electric socket)
with a wet cloth, do not use abrasive and aggressive cleaning agents! Never dry plastic
moldings over a heat source (e. g.
heater, electric/gas stove
).
19
GB
