II. EQUIPMENT AND ACCESSORIES OF VACUUM CLEANER
(Fig. 1).
A - vacuum cleaner
A1 -
ON-OFF
button
A5 - power supply socket
A2 - charging light
A3 - container lock button
A4 - holder
B - dust container
B1 - filter
B2 - filter protector
C - holder
D - brush adapter
E - slot adapter
F - charged
III. PREPARATION AND USE OF THE VACUUM CLEANER
Remove all the packing material, take out the vacuum cleaner and the accessories.
Fastening of the holder to the wall
Fasten the holder
C
close enough to the electric socket using bonding material (Fig.3).
Make sure that there is no electric, telephone, plumbing fittings under the plaster at the
place of mounting the holder. You can also place the holder on a horizontal surface, such
as a table, etc. Holder must be placed or fixed in flat position otherwise vacuum cleaner
can fall down and caused injury. Then slide the vacuum cleaner
A
to the holder together
with the accessories (
D
,
E
) (fig. 3).
Charging the battery
It is necessary to charge the accumulator at least 12 to 14 hours before first use. Plug the
adaptor
F
into the el. mains. Slide the connector of the adaptor lightly into the socket
A5
in
the cleaner (placed in holder
C
). The operation of charging of the accumulator is indicated
by the indicator
A2
. The accumulator is usually fully charged after approx. 12 hrs and gives
operation time for. 15 minutes. Turn the cleaner off before charging! Maximum charging
time is 12 hours, do not exceed this time!
CAUTION
- Do not charge the battery for more than 24 hours!
- If you charge the battery for the first time or after long storage, about 60 % of its
total capacity is charged. After repeated discharge and repeated recharge the
battery is charged to 100 %.
- Let the charger cool down for at least
15 minutes
between charging.
- After completing hard work or in hot environment, the battery may be too hot for
charging. Let the battery cool down before charging.
- The control light
A2
does not provide any information about how much the
battery is charged.
18
GB
