96
Pause
When the program connects with device,
pause video
Esc
Go to the previous level.
Previous group
It can show the previous channels group.
Next group
It can show the next channels group.
Select channel
Choose one video channel of the device. And cooperate with "next
group" can switch the 9 to 16 channels.
Chapter Ten FAQ (Frequently Asked Questions)
01
：
Why the DVR did not run after connect the power supply?
①
Please check the power switch turn on or off at the rear panel of DVR.
②
Please check if the turn on DVR operation correct or not?
③
If you select the a12V, 5A or above? (8ch 5A, 16ch 220V 200W)
02
：
Still stop over on the boot-strap frame?
Physical damaged in hard disk drive
Boot manager abnormal.
03
：
Why does appear the boot running too slow?
①
There are too much capacity data in hard disk drive, the system will automatic search the data when
the system boot up, caused the boot
running slow.
②
The hard disk drive error will cause the system research the data repeatedly, caused the boot
running slow.
04
：
Why does the system reboot repeatedly?
①
Check the hard disk drive, if there is not the FAT32 formatted in it or the problem in it and caused the
Summary of Contents for VCS-HDCVI
