Gallagher SmartScale 800, User Manual

Page: 17 / 95

3E1151 SmartScale 800 User Manual
Page 13
Manual sorting
To set up the Scale for manual sorting, complete the following:
1. Ensure that no port is set for sorting. For further details see Communications
(p 26).
2. Set the required sort mode.
a) Turn the mode selection switch to
S
.
b) Select
SORT MENU
.
The current mode displays at the top of the screen.
c) Press the soft key until the required sorting mode is
displayed.
The sorting mode cycles between Sorting Off and Sorting from 2 ‐ way up
to ‐ way .
3. Set the required sort limits.
a) Press the soft key to select the sort limit you wish to change.
b) To change a gate number:
Note: If no sorter is enabled in the Communications menu, then gate
numbers are not displayed.

Press to delete the existing gate number.

Use the keypad to enter the new gate number (0 to ).
c) To change a sort limit:

Press to delete the existing sort limit.

Use the keypad to enter the new sort limit.
Note:
Set up the sort limits so that the smallest is at the top and the largest is
at the bottom. If you enter the sort limits out of order, the Scale
reorders them once you press .
d) Repeat steps for all required changes.
4. Press to save the changes and return to the
SET UP
menu.
Notes:

On the 2 WAY SORTING screen, gate numbers are shown against the H Gates
and L Gates labels.

H Gates
sets the gate number for animals that weigh anything
H
igher
than the Sort Limit.

L Gates
sets the gate number for animals that weigh the Sort Limit or
anything
L
ower than the Sort Limit.

On the 3 WAY SORTING screen, gate numbers are shown against the H
Gates, C Gates and L Gates labels.

H Gates
sets the gate number for animals that weigh anything
H
igher
than the Upper Limit.