English
Gallagher 3E5260 M6000i/M12000i Energizer User Manual
15
Using The Energizer Controller
Energizer Output and Alarms
The energizer output is the default screen display mode. The zone indicator arrow
is highlighting the energizer zone ( ) and the energizer output voltage is 7.3KV in
this case.
The quickscan bargraph display is also indicating an output voltage of over 7KV.
Controller showing the energizer operating normally
Voltage Alarm
If the energizer output voltage falls below the alarm level (default 3KV) then the
status LED will flash red and the energizer zone indicator will become highlighted.
Controller showing the energizer in output alarm
Status LED
flashes red
