3E2374 Sheep Auto Drafter User Manual
Page 34
To read EIDs, weigh and draft by weight
1.
Set up the scale indicator so it is ready to weigh animals automatically and
specify the weight limits for each group. Make sure the RFID reader is also
attached.
2.
Press the green Start button
on the remote control or press the Entry
Gate button on the Control Bridge for 2 seconds or more.
•
The white LED mode lamps will now be on to indicate that you are in
Automatic Release Mode.
•
The entry gate will open. Once a sheep has entered the entry gate will
close to capture it. When the EID has been read and the sheep has
been successfully weighed the scale indicator will beep. The scale
indicator will display both the animal's weight and the direction it
will be drafted in. The exit gate will open and the sheep will be
drafted according to the weight limits set up in the scale indicator.
To read EIDs, weigh and draft by list
1.
Make sure the RFID reader is connected. Set up the scale indicator so it is
ready to weigh animals automatically and to read EIDs. Then select a draft
list.
2.
Press the green Start button
on the remote control or press the Entry
Gate button on the Control Bridge for 2 seconds or more.
•
The white LED mode lamps will now be on to indicate that you are in
Automatic Release Mode.
•
The entry gate will open. Once a sheep has entered the entry gate will
close to capture it. When the EID has been read and the sheep has
been successfully weighed the scale indicator will beep. The scale
indicator will display both the animal's weight and the direction it
will be drafted in. The exit gate will open and the sheep will be
drafted according to the conditions set up in the scale indicator.
Summary of Contents for HR3
Page 1: ...SHEEPAUTODRAFTER Instructions ENG...
Page 4: ...Page iv 3E2374 Sheep Auto Drafter User Manual Index 49...
Page 48: ......
