8
EN
3.2
Switching on/off
The Birth Alarm Lite can be switched on/off and operated using the rear end
of the special screwdriver that has been included.
In order to switch the Birth Alarm Lite
ON
, you must proceed as follows:
Hold the rear end of the screwdriver against the red
square ( ) next to the symbol on the side of the
Birth Alarm Lite.
You will see the status indicator light up green. You
can now remove the screwdriver.
The Birth Alarm Lite is now active and ready to be
placed on your mare.
In order to switch the Birth Alarm Lite
OFF
, you must proceed as follows:
Hold the rear end of the screwdriver against the red
square ( ) next to the symbol on the side of the
Birth Alarm Lite again.
You will see the status indicator go red. You can
now remove the screwdriver.
The Birth Alarm Lite is now off.