EN
4
The inside of the Birth Alarm Advanced Transmitter
Below is an overview of the system components you will need to operate and use the system.
1.
Batteries.
2.
The two status lights
3.
The connection button (pair button)
4.
The reset button
5.
USB connector (for software updates)
4.1
Installing/replacing batteries
When replacing the batteries for your Birth Alarm Advanced transmitter, you should always use
alkaline batteries (preferably "Duracell", "Panasonic", or "Varta"). The use of rechargeable batteries
is not recommended. Always replace all 3 batteries at the same time. If you cannot remove the
batteries with your fingers, you can also use a small screwdriver, as long as it is done with care. The
batteries must always be placed with their negative pole on the spring.
Always use new batteries at the beginning of the foaling season!
If you will not be using Birth Alarm Advanced transmitter for a longer period of time, such
as after the foaling season, you should remove the batteries to prevent them from
leaking and causing damage to your Birth Alarm Advanced Transmitter.
1
2
2
3
4
5
