Gallagher 3E3446 M5800i, Instructions Manual

Page: 57 / 64

English
QUICK INSTALLATION GUIDE
The following steps show how to quickly get the Alarm system up and running.
Step Standard mode i-Series mode
1
Set to standard mode. See
Zone Address Se ngs (p. 59 )
If zone 6 is already used in the exis ng
i-Series system, then the Alarm system zone
has to be set to any other available zone
se ng. See
Zone Address Se ngs (p. 59).
2
Mount to the wall and connect
the high voltage fence return
and earth (ground) terminals.
3
Connect to AC adaptor power supply
4 Op onal connec ons:
• Via RJ12 cable to i-Series system,
or to an SMS Energizer controller
if in standard mode.
• Relay 1 output to the
Gallagher strobe light
• Relay 2 output to the
Gallagher siren
• 12V ba ery
5 Turn the Energizer and Alarm System ON.
6 Pressing the On/O ff bu on arms/disarms the alarm.
To earth/ ground
To fence
Energizer
SMS
Controller
Alarm System
57
Gallagher 3E3618 i Series Energizer User Manual