Gallagher 3E3446 M5800i, Instructions Manual

Page: 27 / 64

Gallagher 3E3618 i Series Energizer User Manual
27
English
Adding a channel
To add a new energizer to the list of channels, complete the following:
1.
Hold down any two bu ons (ON/OFF/Inquiry) for 3 seconds or more.
The Remote display scrolls through all the “
fi lled” channels. Before returning
back to 1, a “new” channel is indicated by the magnifying glass icon . Once
this icon is displayed, release the bu on.
2. Hold the fence connec on slot against a wire connected to the new energizer.
3. Press any bu on to start the automa c tuning process.
On successful tuning, the magnifying glass icon is cleared and the new
energizer channel number is displayed. If the tuning is unsuccessful, the reverse
lightning bolt symbol
will fl ash.
Changing channels
1. Hold down any two bu ons for 3 seconds.
2. The Remote display scrolls through all the “ fi lled” channels.
3. Release the bu ons when the energizer channel you wish to communicate with
is displayed.
Deleting a channel
1. Hold down any two bu ons for 3 seconds.
The Remote display scrolls through all the “
fi lled” channels.
2. Release the bu ons when the energizer channel you wish to delete is
displayed.
3. Press and hold any two bu ons for 6 seconds.
A er 3 seconds the channel number will start to fl ash for a further 3 seconds.
If both the bu ons are held un l a er the fl ashing period, the channel will be
deleted and the fi rst available channel displayed.
Handy Hint: To remember which channel number is set to each energizer, use the
table at the back of this manual to record it.
Note: When the ba ery is removed from the Remote, all channel informa on is
retained. However, when the ba ery is replaced, the channel selec on will reset
to the lowest con fi gured channel.
USING YOUR REMOTE WITH MULTIPLE
ENERGIZERS
The Remote has nine channels that can be “tuned in” to a speci fi c energizer, enabling
the Remote to control up to nine energizers.
Note: You do NOT need to register your Remote with the Energizer if you are only
using one Energizer.