14
3E4723 Gallagher MBS100 MBS200 MBS400 MBS800 Multi-Power User Manual
UNDERSTANDING YOUR ENERGIZER
Using the Mode Selector Switch
Mode
Description
Battery
Check
The battery charge level is displayed on the bar graph. Battery
voltage will be displayed for approximately 10 seconds only to
conserve battery. To recheck battery, switch off the energizer then
switch back to battery check mode.
OFF
Energizer is OFF. If you are not using the energizer for extended
periods, disconnect the battery from the energizer.
Solar
Smart battery management ensures the energizer operates
continuously. If the battery voltage is low due to prolonged
periods of low sunlight, the energizer will reduce stored energy
and pulse rate to protect the battery from long term damage.
Battery Energizer operates at maximum energy and normal pulse rate
until 40% of battery capacity remains. Suitable for users who
require best energizer performance and are prepared to replace
the battery when needed.
Mains
Power
Energizer operates at maximum energy and normal pulse rate.
Suitable for indoor permanent installations where mains power
is available.
Note:
The energizer stops pulsing if the battery drops below 10% to protect
the battery from permanent damage. The energizer will turn on again
automatically if the battery voltage increases again (for example if a solar
panel is connected and starts recharging the battery).
Summary of Contents for 389318
Page 6: ......
