21-11-1025
Section 3 - 1
3.0 SAFETY
Read all instructions before attempting to install or operate this machine. GALISO,
INCORPORATED IS NOT RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY
UNSAFE USE, MAINTENANCE, APPLICATION, MODIFICATION OR IMPROPER
INSTALLATION OF THIS MACHINE. Please contact Galiso, Inc. for guidance when you
are in doubt as to the proper safety precautions to be taken when installing or operating
this machine.
A. Take care to keep the work area around the HDD clean, dry and free of debris.
This will decrease the chance of operator injury due to slips or falls.
B. Always wear gloves, eye protection and foot protection while operating the HDD.
C. The HDD dryer is capable of producing considerable heat. Use insulating gloves
to protect hands against possible burns from hot areas and items.
D. Do not cover motor fan cowl. Do not drop screwdrivers, nails, etc., into the
openings of the fan cowl.
E. Make sure to bolt, or lag the HDD securely to the floor.
NOTE:
An Over-temperature monitor has been installed to prevent this system from
overheating. If temperatures are over reached, the system will shut off the Heater and
an error message will be shown. Pressing Reset will restart operation, if the
temperature has not exceeded the target pressure.
Summary of Contents for HDD-8RB
Page 11: ...Wiring B 21 11 1025 Ground Wire L1 L2 L3...
Page 12: ...21 11 1025 Schematic...
