GalileoSky GLONASS/GPS v5.1 (223) User’s Manual
GalileoSky Ltd
Page
77
10.13 Signaling mode setting
Command format
SIGN GWTime,DropAlarmTimeout,UseIB
Parameters
GWTime
– duration of the "green wave" which is the time after the signalling starts,
during which no sampling of sensors takes place, [sec];
DropAlarmTimeout
–
time in the alarm mode, after which an automatic switching
to the alarm mode is performed. By zero, the Terminal will stay in the signalling
mode until the command is sent or until it is switched off using the input, [sec];
UseIB
–
should iButton keys be used for arming and disarming:
0 – no;
1 – arming and disarming through the short-time put of one of the trusted iButton
keys;
2 – arming only having one of the trusted iButton keys, if no key is put, the
Terminal is disarmed;
3 – arming only having any of the iButton
keys, if no key is put, the Terminal is
disarmed.
4 – disarming only having any of the iButton
keys, if no key is put, the Terminal is
armed;
5 – arming through the short-time put of one of the trusted iButton keys, no
disarming after disconnecting the key.
6- arming if any iButton key is put. After disconnecting the key, the Terminal is
armed.
Explanation
General configurations of signalling.
Example
Request: SIGN 40,60,0
Reply: SIGN:GWTime=40,DropAlarmTimeout=60 ,UseIB=0;
Command format
S
Explanation
Arming.
Example
Request: S
Reply: Signaling is enabling
Command format
DS
Explanation
Disarming.
Example
Request: DS
Reply: Signaling is disabling
Command format
ST
Explanation
Signaling state. Possible states:
Signaling is disabled – signaling is off,
Signaling is enabled – signaling is on,
Alarm – alarm mode.
Example
Request: ST
Reply: Signaling is disabled.
Command format
AddSigPhone phone[,n]
Parameters
phone
– a phone number.
n
– an optional parameter, added phone number index.
Explanation
Notification phone setting
Example
Request: AddSigPhone 123456789
Reply: SignPhones 123456789;;;;
