GALILEI LIBRA 70, Original Instructions Manual

Page: 7 / 52

2 Cod. 80002350a – 20.07.2018
Unloading and handling of the cabinet
in order to be transported, the cabinet is delivered on a Europallet with standard dimensions (120 x 80 cm),
and fixed by means of proper fixing plates. Unloading must be carried out by means of a forklift, using the
designated handling points for this kind of pallet (along the stringerboards or deckboards, see hatched area
on the below pictures). We take this opportunity to remind that the use of forklifts is exclusively allowed
to authorized personnel who has been properly certified as “forklift operator”.
For the placement of the unit on the final point of installation please refer to the section “GENERAL
RECOMMENDATIONS” -> “PLACEMENT OF THE CABINET”.
Once the cabinet is placed on the final point of installation, remove the protecting film and all fixing plates.
The cabinet will look like the above pictures . Endwalls, bumper-rails and front-glasses are packaged
separately and placed on the display decks inside the cabinet.
For the installation of the parts mentioned above, make reference to the section “SETTING-UP AND
STARTING THE UNIT” of this manual. We remind you that the installation must be carried out by skilled
personnel only, assembly instructions are therefore to be found in the section of this manual dedicated to
technical staff (“SECTION RESERVED TO INSTALLATION AND MAINTENANCE PERSONNEL”)
Weights
Cabinet without packaging: 200 kg
Cabinet with packaging: 225 kg
Noise level
Noise level of the cabinet can vary according to the environment conditions (temperature and humidity
inside the P.o.S.) and to the cleaning level of the condenser. The tests carried out in our lab have recorded a
noise level of 55 dBa (according the conditions defined in the norm EU 89/392/CEE).