18
6
Cleaning and Maintenance
6.1 Cleaning
6.1.1
Aluminum Parts
Dampen the provided micro-fiber cloth with either window cleaner or alcohol &
wipe surfaces.
Notes:
Bead blasted (rough finish) parts will leave a lint deposit on the surface when
using paper towels or most cloths.
The micro-fiber cloth will not leave lint.
Parts which are polished (both clear as well as anodized) require only a
paper towel or soft cloth.
Take care around the motor pulley and switches.
Do not exert force on these components.
Do not allow fluid to run into the motor pulley area or the motor shaft.
6.1.2
Graphite / TPI Platter Surface
Use a paper towel or soft cloth dampened in water to clean this surface.
Do not use any solvents, window cleaner, alcohol, etc. on this surface. It will
smudge the lacquer.
6.1.3
Serac Platter (PVC)
Clean as with aluminum – with a paper towel dampened with window cleaner,
alcohol, etc.
6.1.4
Serac (Painted Base)
Clean as with Graphite / TPI platter – using a paper towel or soft cloth dampened
in water to clean this surface.
6.2 Maintenance
6.2.1
Lubrication