OPERATION MANUAL
RADIO ALARM CLOCK
EAN 4 0 1 7 8 0 5 5 1 0 5 9 3
6
Please note:
The German time signal can also be received all over Europe e.g. in England and Portugal. To
compensate for the time difference, you may open the settings and adjust the existing difference
by selecting the corresponding time zone of the respective country. Manual setup of the clock is
now complete.
Alarm settings
Setting alarm time “Alarm 1” and “Alarm 2”
Your radio alarm clock supports up to two different alarm times
1. Press and hold the
ALM-1
(B1) button, until the hours of alarm time 1 start flashing in
the display. “A1” appears in the display.
2. Press the
(B5) or
(B4) buttons to adjust the hours.
3. Press the
MODE/SET
button (B3) to confirm the setting. The minutes start flashing.
4. Press the
(B5) or
(B4) buttons to adjust the minutes. Press
MODE/SET
(B3) again
to confirm. The alarm time 1 will be saved but not activated.
5. In order to set alarm time 2, press and hold the
ALM-2
(B2) button, until the hours of
alarm time 2 start flashing in the display “A2” appears in the display.
6. Repeat the above steps for setting alarm time 2. Setting the alarm.
Switching the alarm on and off.
1. Press the
ALM-1
(B1) button when in normal time display mode, in order to activate
alarm time 1. The symbol for alarm time 1 (A7) appears in the display.
2. Press
ALM-1
(B1) again to deactivate alarm time 1. The symbol for alarm time 1 (A7)
disappears.
3. Press the
ALM-2 button
(B2) to activate alarm time 2. The symbol for alarm time 2 (A3)
appears in the display.
4. Press
ALM-2
(B2) again to deactivate alarm time 2. The symbol for alarm time 2 (A3)
disappears.
Displaying the set alarm time
1. To snow the stored alarm times when in normal time display mode, press the
MODE/SET button (B3).
Alarm time 1 appears briefly in the display.
