OPERATION MANUAL
RADIO ALARM CLOCK
EAN 4 0 1 7 8 0 5 5 1 0 5 9 3
5
Manually setting the time
If you are out of range of the radio transmitter or if reception is not possible, you can manually
set the time. Nevertheless, the radio clock continues searching for radio signals every single
hour. When the radio signal can again be received, the time will adjust automatically.
1. When in normal time display mode, press and hold the
MODE/SET
button (B3) for
several se
conds, until “00” starts flashing in the display. You may the set the time zone
by pressing the
(B5) or
(B4) buttons. For use in Germany, leave the setting at “00”.
2. Press the
MODE/SET
button (B3) again to save your settings and to navigate to the next
value.
3. Set the additional value in the following sequence as described above: Hours, minutes,
year, month, day, and language.
The hour starts flashing and can be adjusted using the
(B5) or
(B4) button.
4. Press the
MODE/SET
(B3) button again. The minutes start flashing and can be set using
the
(B5) or
(B4) buttons.
5. Press the
MODE/SET
(B3) button again. The year starts flashing and can be set usin
(B5) or
(B4) buttons.
6. Press the
MODE/SET
(B3) button again. The month starts flashing and can be adjusted
using the
(B5) or
(B4) button.
7. Press the
MODE/SET
(B3) button again. The day starts flashing and can be set using
the
(B5) or
(B4) buttons.
8. Press the
MODE/SET
(B3) button again. The language of the weekday display starts
flashing and can be set using the
(B5) or
(B4) buttons.
There following languages available to display the weekday:
German (GER)/English (ENG)/Danish (DAN)/Spanish (ESP)/ Dutch (NET)/ Italian (ITA)/French
(FRA).
Note
: If there is no input for more than 30 seconds, the system returns to normal time display
mode. All settings changed that far will be saved.
Press and hold the
(B5) or
(B4) buttons for approx. 2 seconds to adjust the values in
quick mode.
