9
Heat Pump
•
A heat pump can be added to the purchase of any Elite and Luxury Series spa.
•
If you have added this optional extra, it must be placed a minimum of 1.2m away from the
spa so it can not be used as a climbable surface for a child to get into the spa.
•
There also needs to be a minimum 3m clearance in front and 1.5m clearance behind the
heat pump for it to efficiently circulate air flow.
•
The heat pump also needs to be on a concrete foundation. See the diagram on page 14,
Foundation Requirements.
Cover Lifter
•
A cover lifter is an accessory that attaches to the spa pool and supports removing the cover.
•
The benefits of a cover lifter are twofold: it takes the weight of the cover, making it much easier
for one person to lift the cover on and off the spa and it also protects the cover from damage.
•
Cover lifters require rear and sometimes side clearance. See below for details:
Spa
Cover Lifter
Standard Cover Lifter
This will need 500mm back clearance and 100mm side clearance for it to operate
(50mm each side). These cover lifters fit the following models:
Rosa, Juno, Ceres, Venus, Aquila, Jupiter, Capella, Draco I and Draco II.
