12
Heat Pump Installation Guide
Air space requirements
0.5 m (20")
3 m (9")
0.
5
m
(20
")
*
Air inlet
Air outlet
* Top clearance is only a recommendation to ease service.
1 m
(3
")
Placement
All of Galaxy’s Elite & Luxury Series spas come pre-plumbed with the heat pump unions
(Reference page 20). Refer to the component diagrams in the previous section to see where the
heat pump unions are positioned.
Required Materials
•
40mm of PVC pressure pipe - enough to suit the plumbing configuration of where your heat
pump sits in relation to the swim spa
•
40mm hold saw for cabinet drilling
•
Hacksaw
•
PVC pipe cement
•
Heat Pump Installation Guide can also be found at
Note: We can recommend a local spa technician to come and fit any of our heat pumps. They will bring
with them the required materials to complete the installation work.
