22
Whilst others imitate we continue to innovate. Why settle for a copy when you can have the original?
Tel: 941 697 0324 | Fax: 941 697 1249
[email protected] | www.galaxymultirides.com
Trouble Shooting
F100 Parameter
Checksum
2
The checksum read from
the board does not match
the checksum calculated.
Set P112 [Reset To Defalts] to option 1 “Reset
Defaults”.
F122 I/O Board Fail
2
Failure has been detected
in the drive control and
I/O section.
1. Cycle power.
2. Replace drive if fault cannot be cleared.
Lubricate all bearings on the motion base and the drive chain inside the motion base.
In the event of any other
issue or problem with your motion base, please mark the location of the issue or problem in the following
drawing and fax it back to us at (941) 697-1249.
ISSUE
: THE MOTION BASE IS MAKING NOISES
SOLUTIONS
: