Galaxy TOXIC TRAMPOLINE MELTDOWN Assembly Manual Download Page 12

12

Whilst others imitate we continue to innovate. Why settle for a copy when you can have the original?

Tel: 941 697 0324  |  Fax: 941 697 1249   

[email protected]  |  www.galaxymultirides.com

Operating Your Toxic Trampoline Meltdown™

TOXIC TRAMPOLINE MELTDOWN

Toxic Trampoline Meltdown is an 8 player 
game, the aim of the game is to jump over the 
rotating sweeper arms without getting hit.

FASCIA PANEL

Switch the power on by turning the red & 
yellow  isolator  switch  to  “ON”.  Ensure  you 
release the Emergency Stop button by turning 
the key to the right. You will hear a click and 
your ride is now ready for use.

AUTOMATIC PROGRAMS

There is 1 automatic program. The speed of 
the  program  can  be  adjusted  via  the  speed 
control dial.

NUMBER OF PARTICIPANTS

Meltdown can take up to 8 people at any one 
time. 

DO NOT ALLOW any player to grab, 

hold and/or swing on any part of the foam 

booms. DO NOT ALLOW any player to sit 

and ride on any part of the foam booms

If any player seems to be in distress, 

STOP

 

the foam booms and engage the 

Emergency 

Stop button.

PARTICIPANT PREPARATION

Ensure that all participants remove footwear, 
eye wear, cell phones, neck wear, and any 
sharp items on their person.
All participants must read the rules of play 
and  sign  the  waiver.  Instruct  the  participants 
that they must either jump or duck when the 
foam booms come towards them and that 
they must not grab the boom. 
Verbally warn them that they may get hit by 
the foam booms. If any players are in any 
doubt, they must NOT RIDE.

OPERATING THE RIDE

Toxic Trampoline Meltdown is a 8 player game. 
The  top  speed  is  pre  set.  However,  you  can 
reduce the speed of the ride via the speed dial. 

-

-

7.

8.

9.

1.

2.

3.

4.

5.

6.

Always advise the participant that you are 

increasing the difficulty. 

If the participants do 

not want to go faster, respect their decision. 
DO  NOT  ALLOW  THE  PARTICIPANTS  TO 
CROSS  BOUNCE  ONTO  THE  ADJOINING 
TRAMPOLINES.
The rotating foam booms can be stopped by 
pressing the STOP button. The operator must 
keep  their  finger  over  the  stop  button  and 
constantly watch the participants. Once the 
game has finished the operator must instruct 
the players to exit the trampoline cage 
doorway and exit down the stairs. 

Repeat the 

procedure.

In the event of an emergency

•  Depress the Emergency Stop button 

and remove the key; then turn off the 

mains power switch. Instruct the players 

to evacuate the ride safely offering 

assistance if it is safe to do so. Once the 

players have evacuated the ride, unplug 

the control console from the mains 

outlet

.

The Emergency Stop button MUST always be 

depressed and the key removed whenever 

you are setting up the game or leaving the 

control console unattended

.

SPECTATORS

Do not allow spectators to sit on the exit 
steps or climb or lean on the side netting. We 
would recommend wherever possible to have 
an additional external barrier.

HEIGHT & WEIGHT OF THE PLAYERS

We recommend a minimum user height of 
48” and a maximum user weight of 220lbs. 
per participant per trampoline.

KEEPING YOUR MACHINE SAFE

Whenever  the  machine  is  left  unattended, 
switch off the isolator and press the 
Emergency Stop button. Make sure the key is 
removed. DO NOT use the Emergency Stop 

Summary of Contents for TOXIC TRAMPOLINE MELTDOWN



































Reviews: