Page 9 Galaxy Floor Sanding Machines, Operator’s Manual
How to Replace the Compact Florescent Light
•
Turn the power switch to the “OFF” position and unplug the machine from its electrical power
source. Unscrew the two screws on the light housing.
•
Take off the light housing.
•
Pull the light straight out. It is clipped but with a little effort it comes out.
•
Replace the light. Push and it will lock back in.
•
Reattach the light housing.
Changing the Drive Belt (Follow the Five Sequences of Steps)
These Special Tools Are Required: Contact Your Dealer
1. Remove the Sandpaper Disc.
2. Remove the Sanding Pad.
•
Insert a screwdriver down and in-between two vacuum fan blades. This will be used to prevent
spin and create resistance while you unscrew the Sanding Pad with the Disc Removal Bar (Part
# 697). With one hand on the screwdriver and the other on the Disc Removal Bar turn the bar
counterclockwise while letting the screwdriver’s shaft jam tightly on the machine’s housing.
•
Remove the Sanding Pad.
Light Housing and screws
Replacing Light
Disc Removal Bar & Locking Nut
Remover
